专注云服务商活动
网站运营运维笔记

解决挂载硬盘出现"WARNING: Re-reading the partition table failed with error 22"

今天有在云服务器挂载硬盘的时候有出现报错"WARNING: Re-reading the partition table failed with error 22",于是找一些解决办法,这里看到一个解决方案转载过来,参考后解决。

[root@DB-Server u02]# fdisk -l

 Disk /dev/sda: 500.1 GB, 500107862016 bytes

255 heads, 63 sectors/track, 60801 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

 Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1          13      104391   83  Linux

/dev/sda2              14       60801   488279610   8e  Linux LVM

[root@DB-Server u02]# fdisk /dev/sda2

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel. Changes will remain in memory only,

until you decide to write them. After that, of course, the previous

content won't be recoverable. 

The number of cylinders for this disk is set to 60788.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

   (e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

 Command (m for help): m

Command action

   a   toggle a bootable flag

   b   edit bsd disklabel

   c   toggle the dos compatibility flag

   d   delete a partition

   l   list known partition types

   m   print this menu

   n   add a new partition

   o   create a new empty DOS partition table

   p   print the partition table

   q   quit without saving changes

   s   create a new empty Sun disklabel

   t   change a partition's system id

   u   change display/entry units

   v   verify the partition table

   w   write table to disk and exit

   x   extra functionality (experts only)

 Command (m for help): n

Command action

   e   extended

   p   primary partition (1-4)

p

Partition number (1-4): 2

First cylinder (1-60788, default 1): 

Using default value 1

Last cylinder or +size or +sizeM or +sizeK (1-60788, default 60788): 

Using default value 60788

 

Command (m for help): w

The partition table has been altered!

 

Calling ioctl() to re-read partition table.

 

WARNING: Re-reading the partition table failed with error 22: Invalid argument.

The kernel still uses the old table.

The new table will be used at the next reboot.

出现这个错误,是因为没有在有效的设备(valid device)上进行分区操作(太久没有玩这台测试服务器了,忘记当初如何划分存储,测试一个备份的过程急于需要磁盘空间,没有检查情况,就动手了),实际上这个分区类型为 Linux LVM。已经划给VolGroup00了。后续处理如下。



[root@DB-Server ~]# pvscan

  PV /dev/sda2   VG VolGroup00   lvm2 [465.66 GB / 413.94 GB free]

  Total: 1 [465.66 GB] / in use: 1 [465.66 GB] / in no VG: 0 [0   ]

[root@DB-Server ~]# lvscan

  ACTIVE            '/dev/VolGroup00/LogVol00' [45.97 GB] inherit

  ACTIVE            '/dev/VolGroup00/LogVol01' [5.75 GB] inherit

[root@DB-Server ~]# more /etc/fstab 

/dev/VolGroup00/LogVol00 /                       ext3    defaults        1 1

LABEL=/boot             /boot                   ext3    defaults        1 2

tmpfs                   /dev/shm                tmpfs   defaults        0 0

devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

sysfs                   /sys                    sysfs   defaults        0 0

proc                    /proc                   proc    defaults        0 0

/dev/VolGroup00/LogVol01 swap                    swap    defaults        0 0

[root@DB-Server ~]# vgdisplay

  --- Volume group ---

  VG Name               VolGroup00

  System ID             

  Format                lvm2

  Metadata Areas        1

  Metadata Sequence No  3

  VG Access             read/write

  VG Status             resizable

  MAX LV                0

  Cur LV                2

  Open LV               2

  Max PV                0

  Cur PV                1

  Act PV                1

  VG Size               465.66 GB

  PE Size               32.00 MB

  Total PE              14901

  Alloc PE / Size       1655 / 51.72 GB

  Free  PE / Size       13246 / 413.94 GB

  VG UUID               EYKFmq-O1Ko-0z94-Os3P-AKfC-0bG9-9oTQDh

   

[root@DB-Server ~]# lvextend -L 80G /dev/VolGroup00/LogVol00

  Extending logical volume LogVol00 to 80.00 GB

  Logical volume LogVol00 successfully resized

[root@DB-Server ~]# resize2fs /dev/VolGroup00/LogVol00

resize2fs 1.39 (29-May-2006)

Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizing required

Performing an on-line resize of /dev/VolGroup00/LogVol00 to 20971520 (4k) blocks.

The filesystem on /dev/VolGroup00/LogVol00 is now 20971520 blocks long.

 

[root@DB-Server ~]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/VolGroup00-LogVol00

                       78G   32G   42G  44% /

/dev/sda1              99M   13M   82M  14% /boot

tmpfs                 1.9G 1023M  916M  53% /dev/shm

/tmp/rhel-server-5.7-x86_64-dvd.iso

                      3.6G  3.6G     0 100% /mnt/cdrom

[root@DB-Server ~]# 

参考地址:https://www.cnblogs.com/kerrycode/p/6874479.html

域名主机商优惠信息推送QQ群: 627775477 获取商家优惠推送,禁言。
赞(0)
未经允许不得转载:老左笔记 » 解决挂载硬盘出现"WARNING: Re-reading the partition table failed with error 22"


扫码关注公众号

获取更多站长圈的新鲜事儿!
创业、运营、新知